Product Name: Oulai Si single component dry glass ink one-component dry glass series ink [an ink Technical Reference] one-component-free baked screen printing ink is in order not to have the baking conditions and without plus curing agent and development of one-component high-performance ink. Ink easy to use, without reinforcing agent, without baking, you can get excellent adhesion. With plain, good adhesion, resistance to punching resistance, alcohol and other characteristics. (1) Scope of application: iron, aluminum, alloys, glass, ceramics, plating, stone, anodized aluminum surface and bake (spray) paint, etc. 2. Thinner: the Company's S-03 thinner. Curing agent: You can Add TA-9154 to 10% of the hardener to increase adhesion and improve the hardness of the ink film. Squeegee hardness: 70-80 degrees is appropriate, another angle of 60-70 degrees is best. Mesh: suitable for printing of 100-420 mesh. Dosage per kg: 300 mesh screen can be printed about 30 m2. Drying methods: TA series are the natural evaporation drying ink, the ink is dry 5-10 minutes: after 48 hours drying time in less than 24 hours to achieve optimal performance. Or add a TA-9154 hardener 10% increase adhesion and improve the hardness of the ink film. Two. Oven 90 ℃ bake 20 minutes Canon better. [Two test methods (completely dry)] 1, draw one hundred grid with 3M adhesive tape stripping at least three times or more, off the Mexican phenomenon. Purity of 99% alcohol soaked cotton balls, 500G force in ink Surface wipe back and forth 200 times without decolorization. , Ink, pay attention to things]. Try to print to confirm that meet the requirements before mass production. Two. Do a good job to remove grease and impurities of the surface of the printed work to promote the adhesion effect. 3. Need chromatic, the first color is dry or hard dry after chromatography work. 4. Adhesion, hardness, acid resistance, oil resistance, scouring oil, scratch resistance, abrasion resistance and other properties of the test, the ink is fully cured before detection. 5 Without permit, shall not be in this series ink and other types of ink mix and color. Add the time limit for the use of the curing agent: The ink usage time after joining the curing agent for four to six hours, the higher the temperature the shorter the use of time, the remaining ink can not be recycled.