UVH Series dumb film Varnish 
 Substrates: 
 Applicable to various types of PET film covered with dumb B0PP membrane of the paper, as well as rigid PVC, ABS, PP and other plastic products, printing coating. 

 Product example: 
 Daily necessities and cultural goods, such as: food packaging, cosmetics, audio-visual products, Illustrated etc.. 

 Product Features: 
 Good adhesion, flexibility, gloss and flow leveling most of the dumb film and paper, on the part of the beam splitter paper, plastic products. 


 Light 
 Excellent softness 
 Folding 
 Good adhesion 
 Environmental protection 
 Product gloss yellowing resistance to water resistance flexibility and adhesion 
 UVH-matte film Varnish 87-89 adjustable five excellent die cutting fine 

 Product technical parameters: 
 Viscosity of the product hue / 25 ℃ curing speed curing the energy needed for solid content 
 UVH-dumb film Varnish milky white liquid 3'40-4'20 15-25m/min 120mj/cm2 ≥ 45% 

 Instructions for use: 
 Stencil: 300-380 mesh polyester net yarn, tension :13-15N / cm2 
 Squeegee :65-75 degrees polyurethane squeegee 

 Spraying: spraying water used to spray only added to operate. 
 Amount of reference: 350-mesh printing, 35-40 m / kg 
 UV machine power: It is recommended to use two 5KW or more in high-pressure mercury lamp to ensure there is sufficient output energy. 
 Aids: selection of UVH-1 diluent to reduce varnish viscosity, the choice of UVH-curing accelerator can speed up the varnish curing speed. 
 Cleaning the screen: the wash water network with a common solvent-based cleaning can be completely volatile after a clean print. 

 Note: 
 1, due to the UVH-dumb film Varnish is very good flexibility, high temperatures may occur back to the stick, hair mist or leveling poor phenomenon. In particular, pairs of copper on paper it should be noted. Therefore, operation, varnish mixing print evenly, and UV machines have plenty of good ventilation, attention to cooling and to avoid the piling up too much or the weight of adhesion in the process of closing the paper. Conditional case, the proposed fan-cooled and separated. 
 2, the product part of the material may be a certain stimulating effect, please note that the self-protection; skin contact, in a timely manner with soap and water or water cleaning; if the eye contact, immediately wash with plenty of water on the skin of some operators and timely medical treatment. Adhesive ink on the clothes promptly replaced. 
 3, the varnish attached to the force is excellent, but the levels of treatment and the cleanliness of the surface of the substrate adhesion very major impact these factors have been tested, the varnished surface tension has more than 38 dyne substrate good adhesion. Please carefully tested with the substrate tension is to meet the printing requirements. 

 Product packaging: 
 1 kg 5 kg 20 kg pack 

 Storage conditions: 
 5 ℃ -25 ℃ under the conditions can be stored for six months, to avoid glare, anti-exposure to acids, alkalis.