1, similar to the appearance of plastic materials, but may be different materials, customers need to try to print to determine to meet the requirements, and then batch printing; 
 2, in the printing process, such as drawing or spread may be appropriate to add some cream to slow drying; 
 3, the ambient temperature is too high, it will affect the quality of the ink of the original; 
 4, according to the climate change, away from the fire source, stored in a dark environment. 
 1, ink use the Technical Reference 
 Printing ink is in order not to have the baking conditions and without the addition of the curing agent and development of one-component high-performance ink. Ink easy to use, without reinforcing agent, without baking, you can get excellent adhesion. With plain, good adhesion, resistance to punching resistance, alcohol and other characteristics. 
 (1) Scope of application: iron, aluminum, alloy, glass, ceramics, plating, stone, anodized aluminum surface and bake (spray) paint, etc. 
 Thinner: the Company's S-03 Thinner 
 (3) curing agent: can be added to the TA-9154 hardener 10% increase in adhesion, increase the hardness of the ink film. 
 Squeegee hardness: 70-80 degrees is appropriate, another angle of 60-70 degrees is best. 
 (5) Mesh: for 100-420 net mesh printing 
 Dosage: 300-mesh per kg can be printed on 30 square meters. 
 Drying methods: TA series is natural evaporation drying ink, the ink is dry for 5-10 minutes: the drying time in less than 24 hours. 
 48 hours after one of the best performance. Or add a TA-9154 hardener 10% increase adhesion and improve the hardness of the ink film. Two. Oven 90 ℃ bake 20 minutes Canon better. 
 Second, the test method (completely dry) 
 A designated one hundred grid with 3M adhesive tape stripping at least three times or more, off the Mexican phenomenon. 
 2, purity of 99% alcohol cotton ball soaked wipe 200 times without decolorization 500G force in the ink surface back and forth. 
 , Ink use precautions 
 A. Try to print to confirm that meet the requirements before mass production. 
 Two. Do a good job to remove grease and impurities of the surface of the printed work to promote the adhesion effect. 
 3. Need chromatic, the first color is dry or hard dry after chromatography work. 
 4. Adhesion, hardness, acid resistance, oil resistance, scouring oil, scratch resistance, abrasion resistance and other properties of the test, the ink is fully cured before detection. 
 5 Without permit, shall not be in this series ink and other types of ink mix and color. 
 Add the time limit for the use of the curing agent: The ink usage time after joining the curing agent for four to six hours, the higher the temperature the shorter the use of time, the remaining ink can not be recycled.