Oulai Si MPL from the dry metallic ink Product Description: I. Overview: MPL from the dry metallic ink is a high-grade imported acrylic resin and pigment through advanced combination of fine grinding system, with excellent gloss, good adhesion, resistance impact resistance, gasoline, alcohol, anti-folding characteristics. Add special hardener can increase adhesion, hardness increase. Second, the performance: Suitable for 40T ~ 165T (100 mesh to 420 mesh) screen printing, with 120T polyester monofilament, sensitive adhesive coated screen computing covering an area of ??35 to 40 square meters per kg three solvents: PTS dedicated open water or 783 slow dry water; four, safety standards: in line with European toy Ten metal EN.71 testing standards. V. Scope: iron, aluminum, alloy sheet; glass, plastic plating, PP, ABS plastic type products, screen printing or spraying. Six Features: 1, iron, aluminum, alloys, glass products have a good connection force; 2, high gloss, feel good, good leveling, surface smooth; 3, good surface hardness, high impact resistance, anti- scratch-resistant folds; 4, resistance to gasoline, alcohol-resistant good degree; seven, use: 1, use the Add thinner, stir; 2, multi-color overlay to the next color is dry after printing needs; Ink Operating parameters: 1, pre-treatment: the product surface degreasing, wax, etc; 2, open oil: Stir before use, to stand in for 5-10 minutes, the production can be added to our special diluent to adjust the viscosity (according to a : 0.7 scale or as the case may add thinner), the use of other diluents, matching production to be done before using the experiment. 3. Spray: Requires ink dry film thickness 20-30um; 77T-100T can be screen printing screen printing; 4, pre-bake: hot air drying cycle 80 ℃ -90 ℃ / 10-15 minutes; 5, Exposure: 6-8 Georgia , (21-foot grid exposure); 6, imaging: 0.8% -1.2% Na2CO3 solution, rinse, a pressure of about 2KG / cm2, temperature of 30 ℃ ± 2; 7, after the roast: 150 ℃ / 30 minutes (etch); 8 etching; 9, to ink: with 10% NaOH at 90 degrees in an ultrasonic bath for about 1-3 minutes to remove the ink.